R-10
Tonearm
Designed by Unitra, developed from scratch J-type arm, inspired by the historical Unitra Adam arm, but with better parameters. Made of 6082 type alloy aluminum - a material characterized by high mechanical strength. Both axes are equipped with bearings using Japanese NSK pivot bearings.
Select a variant
Silver
Black
Ask about our offer
+48 780 781 430
Anti-skating
Classic anti-skating using a constant weight mass – this mechanism eliminates stereophony disturbances and prevents excessive wear of the record and cartridge.
DIN connector
Direct signal output from the cartridge via a DIN connector – better sound quality by minimizing the number of physical connections in the signal path.
Q&A
Is the tonearm plug & play?
No, our tonearm is not a plug & play solution. Like most tonearms, it requires self-assembly using the included adaptor. This means that you will need to drill holes in the plinth of your turntable to properly attach the tonearm.
Who is this tonearm for?
Our tonearm is designed for people who have a turntable with a plinth and are able to make the mounting holes. This is standard practice for most tonearms on the market.
What does it fit?
The tonearm can be mounted on turntables that allow for drilling holes in the plinth. We do not include screws or bolts to mount the adaptor, as the method of installation may vary - you can use wood screws or metric bolts and nuts, depending on the design of your turntable.
What are the requirements for mounting the tonearm?
Our arm is designed to be mounted 210mm from the platter axis (pivot to spindle). This means that the buyer's turntable should have the same or similar distance to ensure correct arm geometry.
Product specification
TONEARM
Model
Unitra R-10
Material
Aluminum
Bearing System
Two pairs of bearings on tapered pivots
Effective mass arm
18.5 - 22 g
Effective length
228,2mm
Supported cartridge weight range
5 g- 12 g
Mounting distance (pivot to spindle)
210 mm